Liquid Clothing Printing From Manufacturer 3D Effect Silicone Screen Printing Ink for Coat on The Textile

liquid Clothing Printing From Manufacturer 3d effect silicone screen printing ink for coat on the textile Features & Usage:
TCS-1310H is an additional liquid silicone rubber with two components. It showed up good characteristics, such as excellent weatherability, dimensional stability, high transparency, avirulent environmental protection, high-adhesive strength, heatproof temperature exceeds 250C. It is widely used in printing of textile.

Usage:
1. Take out 1310H, 1310H curing agent with the ratio in 10: 1 fusion and stir well, if you want to have color will need to join at this time is the amount of silica gel 5% of ordinary color paste, if is fluorescent color needs to be added to the 8 % of the amount of silica gel. Then stir well. If you want the silica gel to dry more slowly than normal, the curing agent is more. If you want the silicone dry faster, the ratio of the
gel to the curing agent is 10: 0.8.(you can use 1140c either it is different price The 1310c is good than 1140c)

2. The halftone use 100 to 120 mesh, a mixture of the silicone and curing agent with scraper scraping back and forth on the screen, you can see colloid has appeared on the fabric, and then use baking dryer running back and forth once. The temperature is about 120

3. Reprint the second time, dry it, print the third time, and dry it until it accumulates to the desired height. It is usually repeated four times

4. Take out 3330 mix it with 3330 curing agent in 10: 1 proportion, in just the cloth scrape board as a scraping back and forth on the screen, this is where the covering, after the covering, drying it, again the second operation, drying it, can, can see the product's surface luster, smooth Above is 1310c silk screen operation steps, and 1140c as well as operating steps, the proportion of 1140 and 1140 c curing agent is
10.: 1.1140T iS also used for screen printing. it can screen printingon the bottom and on the top. it dont need change

Certificate

Packaging, storage and transportation and precautions
• The base rubber in this series is packed in 20kg / per iron can.
• This series of products should be stored in a dry, ventilated and cool place to prevent rain and sunlight.
• Avoid contact with condensation type silicone rubber curing agents during operation. Also likely to cause the compound to not solidify are amines, sulfur and phosphorus compounds, and some metal salts. Avoid moisture ingress during use.
• The storage period of this series of products is one year, and the fluidity can be restored under the action of shearing force (strong stirring). It is recommended that the rubber material be stirred in a container first, and then added with a curing agent and stirred evenly. It can still be used after passing the retest.

Lead Time :

About us
When I choose a product,I want to know the manufacturer of the product to verify that my product is of high quality.So I also prepared our information for you, so you can choose us with confidence.

Main product
In addition to the main products, our materials can also be used as raw materials for many products, such as cables, cosmetic molds, mechanical supplies, waterproof supplies.

If you have other needs, you can contact me first to inquire whether our silicone can meet your needs. demand

FAQ